Sybase NNTP forums - End Of Life (EOL)

The NNTP forums from Sybase - forums.sybase.com - are now closed.

All new questions should be directed to the appropriate forum at the SAP Community Network (SCN).

Individual products have links to the respective forums on SCN, or you can go to SCN and search for your product in the search box (upper right corner) to find your specific developer center.

Socket 80

10 posts in General Discussion (old) Last posting was on 2000-03-24 18:49:34.0Z
Marc Itschner Posted on 2000-03-22 16:15:13.0Z
Newsgroups: sybase.public.easerver
From: "Marc Itschner" <Diamonds@SwissGems.com>
Subject: Socket 80
Date: Wed, 22 Mar 2000 17:15:13 +0100
Lines: 6
Organization: M. D. Itschner
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
NNTP-Posting-Host: dial-pri-zu248.active.ch 193.247.73.175
Message-ID: <347_Hs1KHmBl$GA.298@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25928
Article PK: 155956

When I start the Webserver I get the error message:
Unable to create socket 80
How do I go about it, I never had a problem like this.
Marc Itschner


Tim Nesham Posted on 2000-03-22 16:51:31.0Z
Newsgroups: sybase.public.easerver
From: "Tim Nesham" <tim.nesham@born.com>
Subject: Re: Socket 80
Date: Wed, 22 Mar 2000 10:51:31 -0600
Lines: 18
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2919.6600
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
X-Original-NNTP-Posting-Host: 161.49.6.89
Organization: Quad/Graphics,Inc.
NNTP-Posting-Host: dns2.qgraph.com 206.158.124.2
Message-ID: <347_38d8fa17@news.qgraph.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com!news.qgraph.com!161.49.6.89
Xref: forums-1-dub sybase.public.easerver:25918
Article PK: 155945

Which web server? If Dynamo PWS try changing the port to 81. Something may
be using 80, typically IIS and Microsoft's PWS does. You can change your url
to something like:
http://localhost:81/whatever.htm

HTH,
Tim

"Marc Itschner" <Diamonds@SwissGems.com> wrote in message
news:Hs1KHmBl$GA.298@forums.sybase.com...
> When I start the Webserver I get the error message:
> Unable to create socket 80
> How do I go about it, I never had a problem like this.
> Marc Itschner
>
>


Marc Itschner Posted on 2000-03-23 10:21:05.0Z
Newsgroups: sybase.public.easerver
From: "Marc Itschner" <Diamonds@SwissGems.com>
Subject: Re: Socket 80
Date: Thu, 23 Mar 2000 11:21:05 +0100
Lines: 34
Organization: M. D. Itschner
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
NNTP-Posting-Host: 193.247.73.188
Message-ID: <347_IYI4ZFLl$GA.298@forums.sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25847
Article PK: 155881

Hi,
Thank you for your message:
Changed in the PowerDynamo PWS setting to Port 81. Same error message as
before.
I don't have any IIS, PWS from Microsoft installed on the machine.
Where can I see under NT 4.0 what devices might be locked into Port 80/81
etc.

Regard. Marc.

Tim Nesham <tim.nesham@born.com> wrote in message
news:38d8fa17@news.qgraph.com...
> Which web server? If Dynamo PWS try changing the port to 81. Something
may
> be using 80, typically IIS and Microsoft's PWS does. You can change your
url
> to something like:
> http://localhost:81/whatever.htm
>
> HTH,
> Tim
>
> "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> news:Hs1KHmBl$GA.298@forums.sybase.com...
> > When I start the Webserver I get the error message:
> > Unable to create socket 80
> > How do I go about it, I never had a problem like this.
> > Marc Itschner
> >
> >
>
>


Tim Nesham Posted on 2000-03-23 14:40:20.0Z
Newsgroups: sybase.public.easerver
From: "Tim Nesham" <tim.nesham@born.com>
Subject: Re: Socket 80
Date: Thu, 23 Mar 2000 08:40:20 -0600
Lines: 45
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2919.6600
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
X-Original-NNTP-Posting-Host: 161.49.6.89
Organization: Quad/Graphics,Inc.
NNTP-Posting-Host: dns2.qgraph.com 206.158.124.2
Message-ID: <347_38da2cd8@news.qgraph.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com> <347_IYI4ZFLl$GA.298@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com!news.qgraph.com!161.49.6.89
Xref: forums-1-dub sybase.public.easerver:25837
Article PK: 155872

At this point it doesn't sound like a port 80/81 conflict. Check your NT
logs for more information. Also, how did you create the WEB site? The
dynamo web site typically has system/util directories populated with
supporting files. If they are not there then use Sybase Central to recreate
the WEB site. I've found the files it puts there to be important to a
healthy dynamo site.

"Marc Itschner" <Diamonds@SwissGems.com> wrote in message
news:IYI4ZFLl$GA.298@forums.sybase.com...
> Hi,
> Thank you for your message:
> Changed in the PowerDynamo PWS setting to Port 81. Same error message as
> before.
> I don't have any IIS, PWS from Microsoft installed on the machine.
> Where can I see under NT 4.0 what devices might be locked into Port 80/81
> etc.
>
> Regard. Marc.
>
> Tim Nesham <tim.nesham@born.com> wrote in message
> news:38d8fa17@news.qgraph.com...
> > Which web server? If Dynamo PWS try changing the port to 81. Something
> may
> > be using 80, typically IIS and Microsoft's PWS does. You can change your
> url
> > to something like:
> > http://localhost:81/whatever.htm
> >
> > HTH,
> > Tim
> >
> > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > news:Hs1KHmBl$GA.298@forums.sybase.com...
> > > When I start the Webserver I get the error message:
> > > Unable to create socket 80
> > > How do I go about it, I never had a problem like this.
> > > Marc Itschner
> > >
> > >
> >
> >
>
>


Marc Itschner Posted on 2000-03-23 15:35:35.0Z
Newsgroups: sybase.public.easerver
From: "Marc Itschner" <Diamonds@SwissGems.com>
Subject: Re: Socket 80
Date: Thu, 23 Mar 2000 16:35:35 +0100
Lines: 59
Organization: M. D. Itschner
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
NNTP-Posting-Host: dial-pri-zu076.active.ch 193.247.73.86
Message-ID: <347_74HFj0Nl$GA.111@forums.sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com> <347_IYI4ZFLl$GA.298@forums.sybase.com> <347_38da2cd8@news.qgraph.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25830
Article PK: 154352

Hi,
Some background: This is a new NT 4.0 machine. The EA3.5 install is on the
D drive, programmes seem to run fine, is it possible that PWS cannot find
the socket on the C drive? I am thinking of installing EA3.5 on the C drive,
what do you think?
Marc.

Tim Nesham <tim.nesham@born.com> wrote in message
news:38da2cd8@news.qgraph.com...
> At this point it doesn't sound like a port 80/81 conflict. Check your NT
> logs for more information. Also, how did you create the WEB site? The
> dynamo web site typically has system/util directories populated with
> supporting files. If they are not there then use Sybase Central to
recreate
> the WEB site. I've found the files it puts there to be important to a
> healthy dynamo site.
>
> "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> news:IYI4ZFLl$GA.298@forums.sybase.com...
> > Hi,
> > Thank you for your message:
> > Changed in the PowerDynamo PWS setting to Port 81. Same error message as
> > before.
> > I don't have any IIS, PWS from Microsoft installed on the machine.
> > Where can I see under NT 4.0 what devices might be locked into Port
80/81
> > etc.
> >
> > Regard. Marc.
> >
> > Tim Nesham <tim.nesham@born.com> wrote in message
> > news:38d8fa17@news.qgraph.com...
> > > Which web server? If Dynamo PWS try changing the port to 81.
Something
> > may
> > > be using 80, typically IIS and Microsoft's PWS does. You can change
your
> > url
> > > to something like:
> > > http://localhost:81/whatever.htm
> > >
> > > HTH,
> > > Tim
> > >
> > > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > > news:Hs1KHmBl$GA.298@forums.sybase.com...
> > > > When I start the Webserver I get the error message:
> > > > Unable to create socket 80
> > > > How do I go about it, I never had a problem like this.
> > > > Marc Itschner
> > > >
> > > >
> > >
> > >
> >
> >
>
>


Jim O'Neil [Sybase] Posted on 2000-03-23 16:17:48.0Z
Newsgroups: sybase.public.easerver
Date: Thu, 23 Mar 2000 11:17:48 -0500
From: "Jim O'Neil [Sybase]" <joneil@sybase.com>
Organization: Sybase, Inc.
X-Mailer: Mozilla 4.7 [en]C-CCK-MCD (WinNT; U)
X-Accept-Language: en
MIME-Version: 1.0
Subject: Re: Socket 80
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 65
NNTP-Posting-Host: joneil-nt.sybase.com 204.167.42.111
Message-ID: <347_38DA43AB.F8651A03@sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com> <347_IYI4ZFLl$GA.298@forums.sybase.com> <347_38da2cd8@news.qgraph.com> <347_74HFj0Nl$GA.111@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25825
Article PK: 154348


Marc Itschner wrote:

> Hi,
> Some background: This is a new NT 4.0 machine. The EA3.5 install is on the
> D drive, programmes seem to run fine, is it possible that PWS cannot find
> the socket on the C drive? I am thinking of installing EA3.5 on the C drive,
> what do you think?
> Marc.
> Tim Nesham <tim.nesham@born.com> wrote in message
> news:38da2cd8@news.qgraph.com...
> > At this point it doesn't sound like a port 80/81 conflict. Check your NT
> > logs for more information. Also, how did you create the WEB site? The
> > dynamo web site typically has system/util directories populated with
> > supporting files. If they are not there then use Sybase Central to
> recreate
> > the WEB site. I've found the files it puts there to be important to a
> > healthy dynamo site.
> >
> > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > news:IYI4ZFLl$GA.298@forums.sybase.com...
> > > Hi,
> > > Thank you for your message:
> > > Changed in the PowerDynamo PWS setting to Port 81. Same error message as
> > > before.
> > > I don't have any IIS, PWS from Microsoft installed on the machine.
> > > Where can I see under NT 4.0 what devices might be locked into Port
> 80/81
> > > etc.
> > >
> > > Regard. Marc.
> > >
> > > Tim Nesham <tim.nesham@born.com> wrote in message
> > > news:38d8fa17@news.qgraph.com...
> > > > Which web server? If Dynamo PWS try changing the port to 81.
> Something
> > > may
> > > > be using 80, typically IIS and Microsoft's PWS does. You can change
> your
> > > url
> > > > to something like:
> > > > http://localhost:81/whatever.htm
> > > >
> > > > HTH,
> > > > Tim
> > > >
> > > > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > > > news:Hs1KHmBl$GA.298@forums.sybase.com...
> > > > > When I start the Webserver I get the error message:
> > > > > Unable to create socket 80
> > > > > How do I go about it, I never had a problem like this.
> > > > > Marc Itschner
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >

I would generally stay away from low 'alternative' port numbers, so if 80 is in
use, I wouldn't try 81, but something like 8081. The lower port numbers tend to
be assigned to specific services. To see what ports are in use run "netstat -a"
from a command prompt and that will show you what's listening where. As for
your post about c versus d drive, that's pretty irrelevant, the port numbers are
tied to IP addresses not to a physical storage device configuration.
--
Jim O'Neil
Senior Technical Support Engineer
Sybase, Inc


Marc Itschner Posted on 2000-03-23 17:12:48.0Z
Newsgroups: sybase.public.easerver
From: "Marc Itschner" <Diamonds@SwissGems.com>
Subject: Re: Socket 80
Date: Thu, 23 Mar 2000 18:12:48 +0100
Lines: 91
Organization: M. D. Itschner
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
NNTP-Posting-Host: dial-pri-zu080.active.ch 193.247.73.90
Message-ID: <347_5e3o4qOl$GA.202@forums.sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com> <347_IYI4ZFLl$GA.298@forums.sybase.com> <347_38da2cd8@news.qgraph.com> <347_74HFj0Nl$GA.111@forums.sybase.com> <347_38DA43AB.F8651A03@sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25819
Article PK: 155862

Hi,
8081 doesn't work either. Will be trying nestat -a from MS DOS I suppose.
Marc.

Jim O'Neil [Sybase] <joneil@sybase.com> wrote in message
news:38DA43AB.F8651A03@sybase.com...
> Marc Itschner wrote:
>
> > Hi,
> > Some background: This is a new NT 4.0 machine. The EA3.5 install is on
the
> > D drive, programmes seem to run fine, is it possible that PWS cannot
find
> > the socket on the C drive? I am thinking of installing EA3.5 on the C
drive,
> > what do you think?
> > Marc.
> > Tim Nesham <tim.nesham@born.com> wrote in message
> > news:38da2cd8@news.qgraph.com...
> > > At this point it doesn't sound like a port 80/81 conflict. Check your
NT
> > > logs for more information. Also, how did you create the WEB site? The
> > > dynamo web site typically has system/util directories populated with
> > > supporting files. If they are not there then use Sybase Central to
> > recreate
> > > the WEB site. I've found the files it puts there to be important to a
> > > healthy dynamo site.
> > >
> > > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > > news:IYI4ZFLl$GA.298@forums.sybase.com...
> > > > Hi,
> > > > Thank you for your message:
> > > > Changed in the PowerDynamo PWS setting to Port 81. Same error
message as
> > > > before.
> > > > I don't have any IIS, PWS from Microsoft installed on the machine.
> > > > Where can I see under NT 4.0 what devices might be locked into Port
> > 80/81
> > > > etc.
> > > >
> > > > Regard. Marc.
> > > >
> > > > Tim Nesham <tim.nesham@born.com> wrote in message
> > > > news:38d8fa17@news.qgraph.com...
> > > > > Which web server? If Dynamo PWS try changing the port to 81.
> > Something
> > > > may
> > > > > be using 80, typically IIS and Microsoft's PWS does. You can
change
> > your
> > > > url
> > > > > to something like:
> > > > > http://localhost:81/whatever.htm
> > > > >
> > > > > HTH,
> > > > > Tim
> > > > >
> > > > > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > > > > news:Hs1KHmBl$GA.298@forums.sybase.com...
> > > > > > When I start the Webserver I get the error message:
> > > > > > Unable to create socket 80
> > > > > > How do I go about it, I never had a problem like this.
> > > > > > Marc Itschner
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
>
> I would generally stay away from low 'alternative' port numbers, so if 80
is in
> use, I wouldn't try 81, but something like 8081. The lower port numbers
tend to
> be assigned to specific services. To see what ports are in use run
"netstat -a"
> from a command prompt and that will show you what's listening where. As
for
> your post about c versus d drive, that's pretty irrelevant, the port
numbers are
> tied to IP addresses not to a physical storage device configuration.
> --
> Jim O'Neil
> Senior Technical Support Engineer
> Sybase, Inc
>
>


Marc Itschner Posted on 2000-03-24 15:58:30.0Z
Newsgroups: sybase.public.easerver
From: "Marc Itschner" <Diamonds@SwissGems.com>
Subject: Re: Socket 80
Date: Fri, 24 Mar 2000 16:58:30 +0100
Lines: 112
Organization: M. D. Itschner
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
NNTP-Posting-Host: dial-pri-zu105.active.ch 193.247.73.115
Message-ID: <347_SNYaWmal$GA.34@forums.sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com> <347_IYI4ZFLl$GA.298@forums.sybase.com> <347_38da2cd8@news.qgraph.com> <347_74HFj0Nl$GA.111@forums.sybase.com> <347_38DA43AB.F8651A03@sybase.com> <347_5e3o4qOl$GA.202@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25747
Article PK: 155798

Hi
When opening netstat.ex_ I get very cryptic messages, not legible at all.
Can't open it under MS-Dos either.
Only devices on the machine are network card, CD-Rom, the very,
very basic set-up. Shall I disable some devices, if yes which ones?
Is it cheaper to re-install NT and hope for the best?

Marc.

Marc Itschner <Diamonds@SwissGems.com> wrote in message
news:5e3o4qOl$GA.202@forums.sybase.com...
> Hi,
> 8081 doesn't work either. Will be trying nestat -a from MS DOS I suppose.
> Marc.
>
> Jim O'Neil [Sybase] <joneil@sybase.com> wrote in message
> news:38DA43AB.F8651A03@sybase.com...
> > Marc Itschner wrote:
> >
> > > Hi,
> > > Some background: This is a new NT 4.0 machine. The EA3.5 install is on
> the
> > > D drive, programmes seem to run fine, is it possible that PWS cannot
> find
> > > the socket on the C drive? I am thinking of installing EA3.5 on the C
> drive,
> > > what do you think?
> > > Marc.
> > > Tim Nesham <tim.nesham@born.com> wrote in message
> > > news:38da2cd8@news.qgraph.com...
> > > > At this point it doesn't sound like a port 80/81 conflict. Check
your
> NT
> > > > logs for more information. Also, how did you create the WEB site?
The
> > > > dynamo web site typically has system/util directories populated with
> > > > supporting files. If they are not there then use Sybase Central to
> > > recreate
> > > > the WEB site. I've found the files it puts there to be important to
a
> > > > healthy dynamo site.
> > > >
> > > > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > > > news:IYI4ZFLl$GA.298@forums.sybase.com...
> > > > > Hi,
> > > > > Thank you for your message:
> > > > > Changed in the PowerDynamo PWS setting to Port 81. Same error
> message as
> > > > > before.
> > > > > I don't have any IIS, PWS from Microsoft installed on the machine.
> > > > > Where can I see under NT 4.0 what devices might be locked into
Port
> > > 80/81
> > > > > etc.
> > > > >
> > > > > Regard. Marc.
> > > > >
> > > > > Tim Nesham <tim.nesham@born.com> wrote in message
> > > > > news:38d8fa17@news.qgraph.com...
> > > > > > Which web server? If Dynamo PWS try changing the port to 81.
> > > Something
> > > > > may
> > > > > > be using 80, typically IIS and Microsoft's PWS does. You can
> change
> > > your
> > > > > url
> > > > > > to something like:
> > > > > > http://localhost:81/whatever.htm
> > > > > >
> > > > > > HTH,
> > > > > > Tim
> > > > > >
> > > > > > "Marc Itschner" <Diamonds@SwissGems.com> wrote in message
> > > > > > news:Hs1KHmBl$GA.298@forums.sybase.com...
> > > > > > > When I start the Webserver I get the error message:
> > > > > > > Unable to create socket 80
> > > > > > > How do I go about it, I never had a problem like this.
> > > > > > > Marc Itschner
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> >
> > I would generally stay away from low 'alternative' port numbers, so if
80
> is in
> > use, I wouldn't try 81, but something like 8081. The lower port numbers
> tend to
> > be assigned to specific services. To see what ports are in use run
> "netstat -a"
> > from a command prompt and that will show you what's listening where. As
> for
> > your post about c versus d drive, that's pretty irrelevant, the port
> numbers are
> > tied to IP addresses not to a physical storage device configuration.
> > --
> > Jim O'Neil
> > Senior Technical Support Engineer
> > Sybase, Inc
> >
> >
>
>


Jim O'Neil [Sybase] Posted on 2000-03-24 18:49:34.0Z
Newsgroups: sybase.public.easerver
Date: Fri, 24 Mar 2000 13:49:34 -0500
From: "Jim O'Neil [Sybase]" <joneil@sybase.com>
Organization: Sybase, Inc.
X-Mailer: Mozilla 4.7 [en]C-CCK-MCD (WinNT; U)
X-Accept-Language: en
MIME-Version: 1.0
Subject: Re: Socket 80
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 16
NNTP-Posting-Host: joneil-nt.sybase.com 204.167.42.111
Message-ID: <347_38DBB8BE.FC848605@sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com> <347_38d8fa17@news.qgraph.com> <347_IYI4ZFLl$GA.298@forums.sybase.com> <347_38da2cd8@news.qgraph.com> <347_74HFj0Nl$GA.111@forums.sybase.com> <347_38DA43AB.F8651A03@sybase.com> <347_5e3o4qOl$GA.202@forums.sybase.com> <347_SNYaWmal$GA.34@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25736
Article PK: 155785


Marc Itschner wrote:

> Hi
> When opening netstat.ex_ I get very cryptic messages, not legible at all.
> Can't open it under MS-Dos either.
> Only devices on the machine are network card, CD-Rom, the very,
> very basic set-up. Shall I disable some devices, if yes which ones?
> Is it cheaper to re-install NT and hope for the best?
>
> Marc.
>

Given this behavior it does seem you have some fundamental issues here - perhaps
with your TCP/IP stack. It sounds like these problems may really transcend the
fact you are using Sybase products.
--
Jim O'Neil
Senior Technical Support Engineer
Sybase, Inc


Larry Cermak[Team Sybase] Posted on 2000-03-22 16:21:45.0Z
Newsgroups: sybase.public.easerver
From: "Larry Cermak[Team Sybase]" <lcermak@ctpartners.com>
Subject: Re: Socket 80
Date: Wed, 22 Mar 2000 10:21:45 -0600
Lines: 21
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2919.6600
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
NNTP-Posting-Host: node6.dhcpchi.dslspeed.zyan.com 208.41.199.6
Message-ID: <347_MMxFnwBl$GA.111@forums.sybase.com>
References: <347_Hs1KHmBl$GA.298@forums.sybase.com>
Path: forums-1-dub!forums-1-dub!forums-master.sybase.com!forums.sybase.com
Xref: forums-1-dub sybase.public.easerver:25923
Article PK: 155951

Something else is listening on port 80. Another web server maybe (IIS, PWS?)

--

Larry Cermak [Team Sybase]
Corporate Technology Partners, Inc.
www.ctpartners.com
Web DataWindow Articles
(http://sdn.sybase.com/sdn/appdev/get_doc.stm?loc=1001708)

"Marc Itschner" <Diamonds@SwissGems.com> wrote in message
news:Hs1KHmBl$GA.298@forums.sybase.com...
> When I start the Webserver I get the error message:
> Unable to create socket 80
> How do I go about it, I never had a problem like this.
> Marc Itschner
>
>